Welcome to your silent disco experience! This guide will help you set up and enjoy your silent disco headphones.

What’s Included in Your Box

• Headphones
• Transmitters with power cords, RCA cables, and iPhone/USB C adapters (if requested). These transmitters connect to your music sources and send signals to the wireless headphones.

What You’ll Need

1. Power Source

• Transmitters require power. We recommend using a power strip with three available outlets, one for each transmitter.

2. Three Music Devices

• Devices like phones or laptops capable of playing music.
• These devices will connect to the transmitters via RCA cables using aux, USB-C, or Lightning adapters if necessary.
• Note: While Bluetooth connection is available, we recommend using cables for optimal sound quality.

Setting Up the Transmitters

You’ll need to set up three transmitters to broadcast music to the three available channels on the headphones.

Step 1: Power Connection

• Plug the black power cord into the transmitter’s port labeled “9V - 1A”.

Step 2: Audio Connection

• Connect the RCA cable to the red and white audio ports on the transmitter.

Step 3: Connecting to Music Devices

• Plug the 3.5mm jack end of the RCA cable into the headphone port of your music device.
• If your device doesn’t have a headphone port, use the appropriate adapter to connect.

Optional: Bluetooth Pairing

• To connect via Bluetooth:
• Press and hold the Bluetooth button on the transmitter until it starts flashing.
• On your music device, connect to “TC5 Pro”.

Step 4: Powering On the Transmitter

• Locate the sliding switch on the front of the transmitter.
• Turn on the transmitter by sliding from “Off” to either:
• “Low” for up to 100m range.
• “High” for up to 200m range.

Step 5: Setting Channels

• Ensure each transmitter displays a different channel number (1, 2, or 3) on the front panel.
• Important: Do not set multiple transmitters to the same channel to avoid interference.

Step 6: Adjusting the Antenna

• Position the antenna so it’s pointing straight up for optimal signal transmission.

Using the Headphones

Your headphones come fully charged with approximately 8 hours of battery life.

Features

On/Off Switch

• Slide the button to “On” to power up the headphones.

Channel Selection

• Press the green button to toggle between channels:
• 1 (Blue)
• 2 (Red)
• 3 (Green)

Volume Control

• Adjust the volume by sliding the dial up or down.

Comfort Adjustment

• Customize the fit by sliding the ear pieces up or down.

Tips and Tricks

Consistent Volume Levels

• Set the volume on all three music devices to the same level, preferably maximum. Guests can adjust the volume on their headphones if needed.

Initial Setup

• Connect all three transmitters to their music devices before guests put on the headphones.

• Switching to an inactive channel may produce a loud or unpleasant noise.

Cable Management

• Keep all cables separated to prevent interference—ensure they are not touching.

Guest Orientation

• Provide a quick tutorial to guests on using the headphones, including how to power on, change channels, and adjust volume.

Headphone Station

• Set up a designated area for guests to pick up and return headphones.

• Use the provided storage box to keep headphones organized and safe.

Playlist Preparation

• Prepare playlists on three separate music devices using purchased music or streaming services like Spotify.

• Note: If using Spotify on all three devices, make sure each device is logged into a different account to prevent playback interruptions.